Generlink Canada
Related products
Choosing The Right Generator
Portable generators are not strong enough to power your entire home. Decide which appliances you plan to use during an outage and calculate how much power they require. Find a generator whose running wattage is large enough to power these appliances.
In most cases, you will want to purchase a generator whose running wattage is between 4,400 and 10,000 watts. Generators smaller than 4,000 watts are, in most instances, ill-suited for powering a home during an outage as they cannot start many appliances. Generators larger than 10,000 watts are often expensive, difficult to move, noisy, and will not work with the GenerLink transfer switch.
Once you have found the portable generator you plan to purchase, check that it is compatible with the GenerLink by using the link below. If you can not find your generator on this list, please call (800) 886-3837.
There are two models of the GenerLink transfer switch currently available:
MA23 (30-Amp): This model of the GenerLink works with portable generators that have a running wattage below 8,500 watts.
MA24 (40-Amp): This model of the GenerLink works with portable generators that have a running wattage below 10,000 watts.
GenerLok Power Cable
We recommend measuring the distance between your portable generator and the location where the GenerLink will be installed to decide how long you need your GenerLok cord to be. The GenerLink comes with a FREE 20-foot GenerLok cable, and you can upgrade to a longer length if you need it. We currently offer the GenerLok as a 20, 40, 60, 80, or 100-foot long cord.
Plug Options
There are currently three plug options available:
L14-20 Locking: Delivers up to 20 amps of power to your home.
L14-30 Locking: Delivers up to 30 amps of power to your home.
L14-50 Straight: Delivers up to 40 amps of power to your home.
Operating The Generlink
**Make sure to place your portable generator in a well-ventilated area near the GenerLink outside of your home.
How to safely connect portable generator power to your home:
1) Turn OFF all the circuit breakers in your breaker panel.
2) Connect the female end of your GenerLok cord to the GenerLink and the male end to your generator.
3) Turn the circuit breaker of the generator OFF then power on the portable generator by following the procedures stated in the generator’s owner’s manual.
4) Once the generator has been running for 30 seconds, turn the circuit breaker on the generator to the ON position to deliver generator power to the GenerLink.
5) Turn ON only the essential breakers in your breaker panel. Make sure you do not exceed the maximum running wattage of your generator.
How to safely reconnect utility power to your home:
1) Turn OFF all the circuit breakers in your breaker panel.
2) Shut off your portable generator.
3) Turn ON all the circuit breakers in your breaker panel.
